SPECIFICATIONS & TIPS:

SunTwinWoodFloor.jpg

SunTwin 1500 Elite

EdenPURE 1000 XL

EdenPURE 500 XL

  • 1 Year Manufactures Warranty
  • Push button controls
  • IR Remote
  • Electronic Thermostat
  • Heats up to 1000 square feet
  • Rated at approximately 5000 BTU
  • 6 Commercial infrared quartz tubes
  • 3 Copper heat exchangers
  • Caster Wheels
  • Washable filter
  • Galvanized steel inside
  • Medium Oak Veneer MDF Cabinet with Clear Lacquer Finish, Solid Oak Trim and ABS Copolymer front/rear panels
  • Approximately 48 lbs.
  • Height: 17 1/2"  Width: 13 1/2"  Depth: 19 3/4"
  • Uses conventional 110v 3 prong grounded outlet
  • Approx. 6’ long electrical cord, 14 Gauge
  • Amps: 12.6
  • Watts: 1500
  • 1 Year Manufactures Warranty
  • Push button controls
  • IR Remote
  • Electronic Thermostat
  • Heats up to 1000 square feet
  • Rated at approximately 5000 BTU
  • 6 Commercial infrared quartz tubes
  • 3 Copper heat exchangers
  • Caster Wheels
  • Washable filter
  • Galvanized steel inside
  • ABS Copolymer cabinet
  • Approximately 35 lbs.
  • Height: 17"  Width: 13"  Depth: 19 3/4"
  • Uses conventional 110v 3 prong grounded outlet
  • Approx. 6’ long electrical cord, 14 Gauge
  • Amps: 12.6
  • Watts: 1500
  • Listed by United Laboratories              (UL) No. E307136
  • 1 Year Manufactures Warranty
  • Push button controls
  • Electronic Thermostat
  • Temperature Adjustment Panel - Located on back of heater
  • On / Off Switch
  • Heats up to 300 square feet
  • 3 Commercial infrared quartz tubes
  • 1 Copper heat exchangers
  • Washable filter
  • Galvanized steel inside
  • ABS Copolymer cabinet
  • Approximately 21 lbs.
  • Height: 14 1/4"  Width: 11 1/2"  Depth: 13 3/4"
  • Uses conventional 110v 3 prong grounded outlet
  • Approx. 6’ long electrical cord, 18 Gauge
  • Amps: 7.5
  • Watts: 900
  • Listed by United Laboratories (UL) No. E307136

 
Sun_Twin_1500_Elite_Control_Panel.jpeg               EdenPURE_1000_XL_Control_Panel.jpeg                 EdenPURE_500_XL_Control_Panel.jpeg

Tips for better performance:

Wash or vacuum filter often; use in well insulated areas; if using in area not well insulated you will lose sq footage coverage; if using on a cement of ceramic tile its best to put heater up on a bench or table a couple feet off the floor (these surfaces tend to absorb the heat) place near inside wall vs outside wall; avoid placing heater near a cold air return; place heater in central location when heating larger areas; a 40% minimum relative humidity should be maintained

 

Copyright © 2007 SPC Home Products. All Rights Reserved.
Use of this website signifies your agreement to the Terms of Use and Privacy Policy.